![]() ![]() The server’s content storage hard disks are inserted into a hot swap bay. It is also important to place the server horizontally.Ģ.3 Insertion of Drives Each server is shipped with the content hard drives separate from the server. It is important to make sure that the server is secured tightly to the rack and is not susceptible to vibrations or shocks. The screws required to mount the server are not supplied by GDC. The server should be mounted with all cables completely unplugged. The server is usually mounted to the rack in the projector pedestal, but it can also be mounted to any other standard 19” rack or simply placed on a flat surface. ![]() The SX-2000 can be set up with an external touchscreen LCD, as shown in Figure 3.įigure 3 SX-2000 server with external touchscreen LCDĢ.2 Placing the Server The SX-2000 is a 4U unit that is designed to be mounted on standard 19” racks. This section describes the physical setup of the SX-2000 server in order to ensure proper operation.Ģ.1 Server Presentation The front and rear panel of the SX-2000 server is shown in Figure 1 and Figure 2. SX-2000 and Integrated Media Block (IMB) physical setup Older versions of the server software (7.7b-rc15, or 7.7b-rc16) are no longer supported. Note: The currently supported software version for SX-2000 server is 7.7b-rc17 or higher. This document is a guide through the process of setting up the SX-2000 server with the projector, audio system and automation devices used in cinema theatres. Testing Procedures for QC after Installation. 36Īutomation setup for Dolby CP650 devices. 35Īutomation setup for Christie ACT devices. 6Ĭonnecting the IMB to the SX-2000 server. Installing and connecting the GDC Integrated Media Block (IMB). SX-2000 and Integrated Media Block (IMB) physical setup. ![]() ![]() The DMA8Plus is easily set up via a laptop computer, and can be controlled by your cinema’s automation system via standard GPIO automation, serial, or Ethernet commands.GDC Technology Ltd SX-2000 SERVER INSTALLATION MANUAL Analog audio outputs are calibrated to cinema processor reference levels to ensure a straightforward interface with your cinema’s existing sound processor. Two-channelaudio sources can be decoded as discrete L/R, Dolby Pro Logic ®, or Dolby Pro Logic II. The DMA8Plus has four separate digital inputs and will accept up to eight channels of PCM digital audio as well as Dolby Digital and Dolby E bitstreams. The product design is elegant yet rugged and compact, occupying only one rack-unitspace. The adapter provides a comprehensive audio interface while its automation intelligence maintains a seamless fit with your cinema processor. The Dolby ® DMA8Plus Digital Media Adapter is a practical, flexible solution for equipping your sound system for digital cinema, onscreen advertising, special events, and other program sources using digital audio. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |